glowingfish
Ouwe rot
Roland SRV2000 vintage reverb module
Klassieke galm met eigen sound.
Werkt prima en klinkt ook zo !
150E
The SRV-2000 - a long-awaited digital reverb from Roland - was realized by fully applying Roland's advanced digital technology.
Thorough
analysis of actual reverbrated sounds in numerous acoustic
environments allowed Roland to determine the kinds of parameters
necessary for a digital reverb to effectively simulate an acoustic
environment. The SRV-2000 features all such parameters and cna thus
simulate all acoustic envirnoments of any shape, any size, and any
building material, from small rooms to big halls, churches, even
tunnels!
The SRV-2000 incorporates a 16-bit A/D/A converter
which converts analog signals into digital signals. The core of the
SRV-2000 is a 28-bit, parallel-operation signal processor which
serves as the arithmetic-operation circuit. All analog circuits
feature discrete cinstruction to reproduce digital reverb sounds without
loosing clarity or subtlety. The SRV-2000 offers an S/N ratio of 80
dB, a frequency response between 30 Hz and 10 kHz, a dynamic range
of 90 dB, and a THD of 0.03%.
Its flexible, versatile performance, and excellent sound quality
completely satisfy even the most demanding professional needs.
FRONT PANEL
Input Attenuator: 1 Controls:
Reverb Mode Pre-Delay Time, Reverb Time, HF Damp, Reverb Selection, Reverb Output Level: Up/Down,
Non-Linear Mode Pre-Delay Time, Reverb Time, Gate Time, Non-Linear Output Level: Up/Down,
Equalizer Mode
Filter Select, Q Control, Frequency, Boost/Cut: Up/Down, Pre-Delay
Time, Reverb Time, HF Damp, Reverb Selection, Reverb Output Level:
Up/Down,
MIDI Mode MIDI Program Number, MIDI Channel: Up/Down, Omni: On/Off Switches: Copy, Write, MIDI, Reverb/Non-Linear, Equalizer, Room Simulate, Bypass
REAR PANEL Connection Jacks: Input, Output (A, B) Remote Control Jacks: Preset Shift Up, Preset Sift Down, Effect On/Off 1 (Add On), Effect On/Off 2, Infinite On/Off MIDI Connectors: In, Thru Control: Balance (Direct/Reverb) Switch: Input/Output Level Select: (+4/-20 dBm)
OTHER Input Level/Impedance: +4 dBm/56 kOhm, -20 dBm/56 kOhm Stereo Output Level: +4 dBm (+18 dBm max), -20 dBm (-5 dBm max) Output Impedance: 100 Ohm (+4 dBm), 650 Ohm (-20 dBm) A/D/A Conversion System: 16-bit linear Memory Capacity: 48 kbytes Frequency Response: 10 Hz to 50 kHz +0(-1 dB (Direct), 30 Hz to 10 kHz +1/-2.5 dB (Reverb) S/N Radio at Rated Input/Output (IHF-A): 95 dB (Direct), 80 dB (Reverb) Dynamic Range: 105 dB (Direct), 90 dB (Reverb) THD at 1 kHz, Rated Input/Output: 0.01% or less (Direct), 0.03% or less (Reverb)
Pre-Delay Time: 0.1 to 99 s (Reverb Mode), -0.9 to 99 s (Non-Linear
Mode), adjustable in 0.1 s steps from -0.9 to 9.9 s, and 1 s steps
from 10 to 99 s High Frequency Damping Control: x 0.05 to x 1 Reverbration Selection: Room (0.3,1.0, 7.0, 15, 22, 26, 32, 37), Plate (A, B)
Equalizer Characteristics: Low Frequency Control (Cutoff Frequency:
40 Hz to 1 kHz, Boost/Cut: -24 to + 24 dB), Parametric (Middle
Frequency: 250 Hz to 9.99 kHz, High Frequency: 800 Hz to 9.99 kHz, Q:
0.2 to 9; adjustable in 0.1 steps, Boost/Cut: -24 to + 12 dB) 482 (W) x 362 (D) x 47 (H) mm (19" x 14-1/4" x 1-7/8"), 19" rack-mountable (EIA-1U) Weight: 5.2 kg (11 lb. 7 oz.) Accessories: Connection cord x 2
Klassieke galm met eigen sound.
Werkt prima en klinkt ook zo !
150E
The SRV-2000 - a long-awaited digital reverb from Roland - was realized by fully applying Roland's advanced digital technology.
Thorough
analysis of actual reverbrated sounds in numerous acoustic
environments allowed Roland to determine the kinds of parameters
necessary for a digital reverb to effectively simulate an acoustic
environment. The SRV-2000 features all such parameters and cna thus
simulate all acoustic envirnoments of any shape, any size, and any
building material, from small rooms to big halls, churches, even
tunnels!
The SRV-2000 incorporates a 16-bit A/D/A converter
which converts analog signals into digital signals. The core of the
SRV-2000 is a 28-bit, parallel-operation signal processor which
serves as the arithmetic-operation circuit. All analog circuits
feature discrete cinstruction to reproduce digital reverb sounds without
loosing clarity or subtlety. The SRV-2000 offers an S/N ratio of 80
dB, a frequency response between 30 Hz and 10 kHz, a dynamic range
of 90 dB, and a THD of 0.03%.
Its flexible, versatile performance, and excellent sound quality
completely satisfy even the most demanding professional needs.
FRONT PANEL
Input Attenuator: 1 Controls:
Reverb Mode Pre-Delay Time, Reverb Time, HF Damp, Reverb Selection, Reverb Output Level: Up/Down,
Non-Linear Mode Pre-Delay Time, Reverb Time, Gate Time, Non-Linear Output Level: Up/Down,
Equalizer Mode
Filter Select, Q Control, Frequency, Boost/Cut: Up/Down, Pre-Delay
Time, Reverb Time, HF Damp, Reverb Selection, Reverb Output Level:
Up/Down,
MIDI Mode MIDI Program Number, MIDI Channel: Up/Down, Omni: On/Off Switches: Copy, Write, MIDI, Reverb/Non-Linear, Equalizer, Room Simulate, Bypass
REAR PANEL Connection Jacks: Input, Output (A, B) Remote Control Jacks: Preset Shift Up, Preset Sift Down, Effect On/Off 1 (Add On), Effect On/Off 2, Infinite On/Off MIDI Connectors: In, Thru Control: Balance (Direct/Reverb) Switch: Input/Output Level Select: (+4/-20 dBm)
OTHER Input Level/Impedance: +4 dBm/56 kOhm, -20 dBm/56 kOhm Stereo Output Level: +4 dBm (+18 dBm max), -20 dBm (-5 dBm max) Output Impedance: 100 Ohm (+4 dBm), 650 Ohm (-20 dBm) A/D/A Conversion System: 16-bit linear Memory Capacity: 48 kbytes Frequency Response: 10 Hz to 50 kHz +0(-1 dB (Direct), 30 Hz to 10 kHz +1/-2.5 dB (Reverb) S/N Radio at Rated Input/Output (IHF-A): 95 dB (Direct), 80 dB (Reverb) Dynamic Range: 105 dB (Direct), 90 dB (Reverb) THD at 1 kHz, Rated Input/Output: 0.01% or less (Direct), 0.03% or less (Reverb)
Pre-Delay Time: 0.1 to 99 s (Reverb Mode), -0.9 to 99 s (Non-Linear
Mode), adjustable in 0.1 s steps from -0.9 to 9.9 s, and 1 s steps
from 10 to 99 s High Frequency Damping Control: x 0.05 to x 1 Reverbration Selection: Room (0.3,1.0, 7.0, 15, 22, 26, 32, 37), Plate (A, B)
Equalizer Characteristics: Low Frequency Control (Cutoff Frequency:
40 Hz to 1 kHz, Boost/Cut: -24 to + 24 dB), Parametric (Middle
Frequency: 250 Hz to 9.99 kHz, High Frequency: 800 Hz to 9.99 kHz, Q:
0.2 to 9; adjustable in 0.1 steps, Boost/Cut: -24 to + 12 dB) 482 (W) x 362 (D) x 47 (H) mm (19" x 14-1/4" x 1-7/8"), 19" rack-mountable (EIA-1U) Weight: 5.2 kg (11 lb. 7 oz.) Accessories: Connection cord x 2
Attachments
Last edited by a moderator:
