To enter the test mode, hold KEY TRANSPOSE down and turn the JUNO-106 ON;
the display window will read :
---- ----
| | | |
#### ---- (#### = Segment on)
| | | |
---- ####
indicating that the unit is in the test mode. During the test mode,
each switch serves as follows :
==============================================================================
| SWITCH | FUNCTION DURING TEST MODE |
==============================================================================
| KEY | POLY 1 | UNISON: All six modules are assigned simultaneously |
| ASSIGNMENT | | to a key being pressed. |
| |--------|------------------------------------------------------|
| | POLY 2 | NON The voices are assigned to the keys played |
| | | ROTARY: in the order of CH1 to CH6 as long as the |
| | | previous keys are held down. |
| | | One-key staccato always sounds CH1 only. |
| | | |
| | | The display window indicates current channel number. |
| |--------|------------------------------------------------------|
[b]| | POLY 1 | ROTARY: The voices are assigned in a cyclic manner; |
| | & | 7th key steals the voice from the 1st key. |
| | POLY 2 | |
| | | |
| | | The display window indicates current channel number. |[/b]
==============================================================================
| BANK | GROUP A| HOLD OFF |
| GROUP | GROUP B| HOLD ON |
==============================================================================
| TAPE | SAVE | MIDI FUNCTION II CHECK |
| CHECK LED | VERIFY | MIDI FUNCTION I CHECK |
==============================================================================
| MIDI CH | | Turns D/A output to 0V |
==============================================================================
Pressing BANK buttons also evokes Test Program and sets the front panel
controls as below. PATCH buttons have no effect in the test mode.
=============================================================================
|B| TEST |LFO| DCO |H| VCF |VCA| ENV |C|
|A| FUNCTION |---|-------------------|P|---------------|---|------------|H|
|N| |R|D|R|S |S |S |N |L|P|P|F|F |R |E|E|L|K |~|L|A|D |S |R |O|
|K| |A|E|A|Q |A |U |O |F|W|W| |R |E |N|N|F|Y |/|E| | | | |R|
| | |T|L|N|U |W |B |I |O|M|M| |E |S |V|V|O|B |S|V| | | | |U|
|N| |E|A|G|A | | |S | | | | |Q |O | | | |D | |E| | | | |S|
|O| | |Y|E|R | | |E | | |M| | | | |P| | | |L| | | | | |
|.| | | | |E | | | | | |O| | | | |O| | | | | | | | | |
| | | | | | | | | | | |D| | | | |L| | | | | | | | | |
| | | | | | | | | | | |E| | | | |A| | | | | | | | | |
|-|------------|-|-|-|--|--|--|--|-|-|-|-|---|--|-|-|-|--|-|-|-|---|--|---|-|
|1| VCA OFFSET |5|0|8| | | 0| 0|0|0|M|1|10 | 0|0|N|0|10|~|5|0| 0|10| 0|0|
|2| SUB OSC |5|0|8| | |10| 0|0|0|M|1|10 | 0|0|N|0|10|~|5|0| 0|10| 0|0|
|3| VCA/CF GAIN|5|0|8| | | 0| 0|0|0|M|1|6.3|10|0|N|0|10|~|5|0| 0|10| 0|0|
|4| RAMP WAVE |5|0|8| |ON| 0| 0|0|0|M|1|10 | 0|0|N|0|10|~|5|0| 0|10| 0|0|
|5| PWM 50% |5|0|8|ON| | 0| 0|0|0|M|1|10 | 0|0|N|0|10|~|5|0| 0|10| 0|0|
|6| NOISE LEVEL|5|0|8| | | 0|10|0|0|M|1|10 | 0|0|N|0|10|~|5|0| 0|10| 0|0|
|7| VCF HI/LO |5|0|8| | | 0| 0|0|0|M|1|10 | 0|0|N|0|10|~|5|0| 0|10| 0|0|
|8| RE-TRIGGER |5|0|8|ON| | 0| 0|0|0|M|1|10 | 0|0|N|0|10|~|5|0|1.3| 0|1.3|0|
=============================================================================
Edit functions are also active in test mode; when an edit is made, display
window lights a dot. To return to the test mode, press the same BANK button
again.